How do you clear a Brother drum error?

How do you clear a Brother drum error?

If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.

1. Make sure that the machine is turned on.
2. Open the front cover.
3. Press and hold OK for 2 seconds.
4. Press the Up arrow key or 1 to reset the drum counter.
5. Close the front cover.

Why does my printer say drum?

The message “Drum Error” will appear on the display if the corona wire on the drum unit needs to be cleaned. 1. Open the front cover and remove the drum unit and toner cartridge assembly. Be sure to place the drum and toner assembly on a piece of paper in case of spilled or scattered toner.

How do I know if my Brother drum needs replacing?

The drum unit may need replacing if you notice the printer producing blurry, low-quality images. Black or colored toner spots on printouts also indicates a failing drum unit. In some cases, horizontal lines may develop across the printout every time the paper passes the failing part of the drum.

How do you reset the drum life on a Brother HL 2280DW?

DCP-7060D, DCP-7065, HL-2280DW,

1. Turn on the printer and replace the drum. Keep the front door open.
2. Press the Clear button.
3. Press the Arrow Up button.
4. When the screen says Accepted, close the front door.
5. The drum unit is reset.

How do you reset the drum counter on a Brother HL 2280dw?

How to reset the drum counter:

1. Make sure the machine is on, then open the front cover and push “clear” button.
2. Confirm you are installing a new drum unit by pressing the “up” arrow.
3. When the screen says “Accepted”, close the front cover and you can now start printing!

How do I reset the drum unit on my Brother printer?

Press + to reset the drum unit counter. Brother strongly recommends that customers use only genuine Brother drum units and/or toner cartridges Each Brother laser printer is designed to work at pre-set temperatures that are matched exactly to each of our individual toner formulations.

Does the brother limited warranty apply to third party drum units?

The Brother limited warranty does not apply to any problem that is caused by the use of unauthorized third party drum units, toner cartridges or toner. For more information on other error messages, click here. If the error message still continues to appear, please contact Brother Customer Service from “Contact Us”.

How do I unlock the toner cartridge on my brother dryer?

Turn the green lock lever (1) at the left of the machine counterclockwise to the release position. Holding the green handles of the drum unit, lift the front of the drum unit and remove it from the machine. Hold the handle of the toner cartridge and slightly push it to unlock.

What does’drum error slide the Green tab on the drum unit’?

The message ‘Drum Error, Slide the Green Tab on the Drum Unit’ will appear when the corona wire on the drum unit needs to be cleaned. 1. Clean the corona wire inside the drum unit for all four colors. a. Lift the top cover using the indented handle in the center until you hear a click.