How much HP can a B18B block handle?

How much HP can a B18B block handle?

The B18 internals can handle 300 horsepower when tuned properly. The weight can be as high as 12 pounds, but make sure the tuning is correct. With that turbo, you should be able to reach 275 with 10 or so psi.

How much HP does B18B have?

Power: 187 hp (139 kW; 190 PS) at 7600 RPM & 174 N⋅m (128 lb⋅ft) at 7500 RPM. Compression: 10.8:1. Bore x Stroke: 81 mm × 87.2 mm (3.19 in × 3.43 in)

What is the difference between OBD2A and OBD2B?

The dizzy plug is different, the there are two plugs on the OBD2A harness but on the OBD2B harness the two plugs have been combined into one. Wires are the same just the physical plug is different.

How much HP can stock b18b sleeves handle?

Registered. You should easily be able to hit 250 whp on a stock b18b block.

Does B18B have VTEC?

b18b is non-vtec and only appeared in the GSI integra. Both make roughly the same torque but vti-r revs higher and makes more horse power.

What does obd2a mean?

OBD II is an acronym for On-Board Diagnostic II, the second generation of on-board self-diagnostic equipment requirements for light- and medium-duty California vehicles.

Is a 98 Honda Civic obd1 or OBD2?

Re: 98 Honda civic D16Y7 – is there a OBD2 port Yes, it should have the same connector as the North American model. It is found under the dash in the left footwell, near the outside of the car.

When did Honda start using OBD2?

OBD2 was introduced on all 1996 and newer model year passenger cars and light trucks sold in the United States.

What are the specs of a B18B engine?

Specifications of B18B camshafts: duration 274/278 deg, lift 9.98/9.65 mm. The power was 142 HP @ 6,300 rpm and the torque was 172 Nm @ 5,200 rpm, with the rev limit of 7,200 rpm. This engine was intended for Acura Integra, Honda Integra, JDM Honda Domani and Orthia. 3. B18B2 was the B18B1 for Australia 4.

What are the specs of a B18C5 camshaft?

Specifications of B18C5 camshafts are the following: duration (at.050″ or 1 mm lift) 240/235 deg, lift 11.5/10.5 mm. As a result, the power reached 195 HP @ 8,000 rpm, and the torque was 176 Nm @ 7,500 rpm, and the redline was set to 8,300 rpm. 13. B18C6 was a European analog to B18C Type R, which was installed in Honda Integra Type R.

What is the size of a Honda B18 fuel injector?

The size of Honda B18 fuel injectors was 240 cc. In addition to B18, B-series included other engines: B16, B17, and B20. Production of B18B and B18C continued until 2001, and then they were replaced by K20A. Honda B18C (B18B) engine modifications and differences

How much HP can a Honda B18 Turbo handle?

B18 Turbo. Now let’s learn how to turbo a Honda B18. If your engine is in good condition, B18C stock internals will withstand 250whp. You can even get 300whp, but reliability will be lost completely. B18B stock internals can withstand about the same.