Where do you put the K-TAG?
Table of Contents
If the truck does not have a center bar, the K-TAG should be centered 3″ from the bottom of the windshield. If the truck has a center bar, position the K-TAG 2″ to the right of the center bar (looking from the inside of the vehicle), and 2″ from the bottom of the windshield (Figure 1).
How do you put a tag on a windshield?
Locate the correct position for the tag — the upper center portion of your windshield behind the rearview mirror, at least 1 inch to the right of the mirror and at least 1 inch below the top edge of the windshield.
How do you use a K-TAG?
Using K-TAG is easy: you simply adhere the tag properly to your vehicle and link your account to a valid credit card or to your bank account. Statements for the months you have driven are emailed to you. Plus, you’ll receive an electronic discount on every trip!
Does Kansas K-TAG work in Oklahoma?
Regional travel is easier! K-TAG works on toll roads in Oklahoma and Texas. Easily manage your account and review your tolls through an online account portal and mobile app.
Does K-TAG work for pikepass?
Will the TollTag work on Kansas Turnpike Authority (KTA – K-TAG) and Oklahoma Turnpike Authority (OTA – PIKEPASS) toll roads? Yes, the sticker version of the NTTA TollTag will work as a payment method on all KTA and OTA toll roads.
What is K-TAG ECU?
K-TAG is the most complete and professional tool to read, write and clone an ECU or TCU on any vehicle. K-TAG communicates with all ECUs, even the latest generation ones. You can read and write directly to the ECU microprocessor, the flash memory and the EEPROM, without opening the ECU!
Where do RFID stickers go on windshield?
It should be sticked on the top – center location of the windshield. Stick the FASTag from inside of the car windshield. It should be sticked on the top – center location of the windshield.
Where is my EZ tag activation number?
The activation number appears on your EZ TAG order receipt.
Does Kansas have easy pass?
Yes. As long as your account is in good financial standing and your EZ TAG is properly mounted on your vehicle, your EZ TAG will work on toll roads in Kansas.
Can I use EZ Pass in Kansas?
How do you put on a PIKEPASS sticker?
The PIKEPASS Sticker CAN be mounted near, but not touching, other out-of-state toll tags. You MUST correctly and permanently install the PIKEPASS Sticker on the windshield before traveling on Oklahoma turnpikes. DO NOT attach the Sticker to your sun visor or any temporary location.
What can Kess V2 do?
The KessV2 allows chip tuners to easily read and write chip tuning files to the engine control unit ( ECU) of different vehicles. The Kess V2 is an OBD tuning tool which connects to the vehicle through the OBD port. The KessV2 can tune the following vehicles within minutes through the OBD port of the vehicle: Cars.
How do I apply the TollTag to the glass?
Apply Make sure you have the TollTag in the right location (Step 1) before touching it to the glass. Hold the TollTag away from the glass with one hand and press one edge to the glass. Stick the TollTag to the glass by rubbing your thumb up and down in a zigzag motion across the entire TollTag surface.
How do you remove a toll tag from a car windshield?
Removing Your TollTag If you want to remove the TollTag from your windshield, first peel off the TollTag. Then scrape off any remaining residue, and finally clean that area of your windshield with an alcohol wipe or windshield cleaner. Once you remove your TollTag, it CANNOT be reused.
Which side of the license plate display displays my agency label?
It displays your agency label and two upward-pointing arrows. ( Fig.-1) This side faces the driver with the arrows pointing toward the roof of your vehicle.
Which side of the transponder displays my agency label and arrow?
It displays your agency label and two upward-pointing arrows. ( Fig.-1) This side faces the driver with the arrows pointing toward the roof of your vehicle. Identify the position in your vehicle in which the transponder will be mounted.