How do I fix my built-in microphone on my Toshiba laptop?

Table of Contents

Now verify the following settings.

Step 1: Enable the Microphone. a. Click on Start and type sound. b. Click on Sound under Control Panel. c.
Step 2: Un-mute the microphone and increase Microphone Boost. Ensure that the microphone is not set to mute. a. Follow Step 1 a-c to go to Recording tab. b.

How do I fix my microphone on my Toshiba laptop Windows 7?

Laptop Microphone not working

Windows 10 and Windows 8, press the Windows key and type “sound. In Windows Vista and Windows 7, open the Start Menu and type “Sound” in the search field.
Select Sound from the results.
Select the RECORDING tab and select the desired microphone.
Click Properties to view and modify settings.

Why is my built-in microphone not showing up?

Usually, the problem with the built-in microphone not working is caused by problematic drivers. A good solution for this problem is to run the Audio troubleshooter in Windows 10. Updating the drivers with a dedicated tool can also fix the issue right away.

Why is my microphone not working on Windows 7?

Open the Start menu and open the Control panel from the right-side menu. Make sure that your view mode is set to “Category.” Click on “Hardware and Sound” then select “Manage audio devices” under the Sound category. Switch over to the “Recording” tab and speak into your microphone.

How do you fix an inbuilt microphone on a laptop?

How to Fix a Laptop Microphone That Doesn’t Work

Open the Control Panel.
Click Hardware and Sound.
Click Sound.
Click Recording.
Right click your microphone, and click Properties.
Click Levels.
If the microphone icon has a crossed out red circle next to it, click it to unmute.

Why is my microphone not showing up in device Manager?

Re-enable Your Microphone From Control Panel Solving this problem is simple, you just need to make the microphone visible again, and here’s how to do it: Go to Control Panel. Click on Sound and then go to Recording tab. Right-click with your mouse somewhere on the windows and click on Show Disabled Devices.

How do I reinstall built-in microphone?

How to reinstall built-in microphone?

Open the Control Panel. (
Click on the Sound icon.
Click on the Recording tab.
Right click on an empty area and click on Show Disabled Devices.
You will now see the disabled audio devices with the arrow pointing down on them.

How do I enable microphone on Windows 7?

How to: How to enable a microphone in Windows 7

Step 1: Navigate to the “sound” menu in Control Panel. The Sound menu can be located in control panel under: Control Panel > Hardware and Sound > Sound.
Step 2: Edit device properties.
Step 3: Check device is Enabled.
Step 4: Adjust mike levels or boost.

Where is the microphone on a Toshiba Portege?

Toshiba Satellite P10/15 models don’t have a built in microphone, so you’ll need to use an external microphone to record voices or other sounds. Using an external mic requires just a bit of additional configuration. Double click the speaker on the taskbar or right click and select open.

How do I fix the built in microphone on my laptop?

How to fix micro microphone not working on Windows 7?

Microphone was not working. It had Windows 7. I tried going to Manage Audio devices and no microphone appeared. I know the computer had a built in mic. So I tried the following: “Start -> Control Panel -> System and Security -> Find and Fix Problems -> Hardware and Sound -> Troubleshoot Audio recording”.

How do I troubleshoot audio recording on my Toshiba Satellite P50?

“Start -> Control Panel -> System and Security -> Find and Fix Problems -> Hardware and Sound -> Troubleshoot Audio recording”. The system found and fixed the problem for me. Was this answer helpful? My in-built mic in my TOSHIBA Satellite P50 worked perfectly until it suddenly stopped working. I’m running Win10 on a 64-bit system.

How do I change the microphone settings on my computer?

Windows 10 and Windows 8, press the Windows key and type “sound. In Windows Vista and Windows 7, open the Start Menu and type “Sound” in the search field. Select Sound from the results. Select the RECORDING tab and select the desired microphone. Click Properties to view and modify settings.

Does Toshiba Satellite P50 mic work with Conexant smartaudio HD?

My in-built mic in my TOSHIBA Satellite P50 worked perfectly until it suddenly stopped working. I’m running Win10 on a 64-bit system. All settings seemed to fit perfectly and Conexant SmartAudio HD device was enabled and selected as default device with correct levels (Microphone Array and Boost) and was not muted and green highlighted.