How do I program my 2013 Ford Explorer key?

Table of Contents

Press the UNLOCK button on the interior of that door. Then, turn the ignition from OFF to RUN and back eight times within 10 seconds, with the final toggle ending on the RUN option. This allows You to enter “progRamming” mode, of which You’ll be notified by the doors locking and unlocking.

How much does it cost to get a Ford Explorer key made?

In short, replacing a Ford Explorer key can cost between $125 to $420. The cost depends on a number of factors: The type of key you need.

Does a Ford Explorer have a chip in the key?

NOTE: This ignition key has a chip hidden inside of the plastic head. It is a part of your automobile security system to prevent theft. Therefore, you MUST get it both: cut and programmed. Cutting only will NOT allow you to start the engine.

How much is a replacement key fob Ford?

If you purchased your Ford from a dealership, you may be able to get replacement keys. When you’ve lost a key, considering getting a replacement and a spare. If you have to pay for replacements, you will spend anywhere from $50 to $250 per item for properly programmed transmitter keys and/or fobs.

What is a Ford smart key?

Smart Key. The Smart Key or Integrated Keyhead Transmitter works as a remote keyless entry transmitter for your keyless entry system, which lets you quickly enter the vehicle. It also functions as a programmed ignition key, which lets you lock or unlock the vehicle as well as start the engine.

How do you program a Ford Explorer key?

Proceed to open the driver-side door, pressing the UNLOCK button inside the door. Get behind the wheel, and turn the ignition from OFF to RUN 8 times within 10 seconds. The final time should end on RUN, which gets you into programming mode.

How much does it cost to get a key programmed at Ford?

Transponder key programming starts at $50 – $75. This includes keys for GM, Ford, Dodge, Honda, Toyota, Nissan. Remote or fob programming starts at $65. This does not include remotes with keys attached.

How do you get into a Ford Explorer without the key?

The keyless entry code lets you unlock the vehicle’s doors by using your 5-digit entry code. Enter your five-digit code to unlock the driver’s door….How do I unlock my Ford without a key?

Tap Home in the FordPass App.
Select a vehicle.
Press and hold the Unlock button until the circle starts spinning.

What does 2X mean on key fob?

Remote Start System
If your vehicle is equipped with a Remote Start System, the 2X button will allow you to start your vehicle before you get in.

How do you program a Ford key fob?

Shut the car doors,then open the driver-side door. Press the UNLOCK button the driver-side door.

Now,turn the ignition from OFF to RUN 8 times. This should be done within 10 seconds,with the 8th time ending on RUN.

Press any button on the Ford remote to program it.

Have more than one key fob?

Lastly,turn the ignition OFF.

How to program a Ford key fob?

Close the car doors,then open the driver-side door. Press the UNLOCK button on the driver-side door.

Next,turn the ignition from OFF to RUN 8 times. Do this within 10 seconds,making sure the 8th time ends on RUN.

Press any button on the Ford remote to be programmed.

Have a second remote key fob?

Finally,turn the ignition to OFF.

How to program Ford keyless remote or key fob?

free ford remote programming instructions 1) Turn ignition from OFF to RUN (as far as you can go without cranking the engine) 8 times (one turn is from OFF to RUN and back to OFF) within 10 seconds, with the 8th time ending in RUN (8th time you only go from OFF to RUN and stop there) ( do not start the engine ).

How to programming key fob?

Insert the unprogrammed duplicate key into the ignition switch,

Connect your programming device to the OBD2 port of your vehicle.

Run the programming software compatible with your vehicle and your programming device.

Carefully follow the instructions prompted by your programming device.