How do I reset my Amcrest 960H DVR?

How do I reset my Amcrest 960H DVR?

Factory Reset Procedure (960H)

1. The 960H has an internal factory reset button located on the motherboard.
2. Secondly, find the hard reset button located along the back side of the motherboard underneath the eSATA port next to the heat sink.

What is the default password for Amcrest DVR?

Amcrest HDCVI DVR without front power button When the DVR turns on just follow the setup wizard and enter the default username (admin) and password (admin).

How do I factory reset my Amcrest DVR?

To factory reset the device, hold the reset button down and unplug the NVR from power. Once power is removed from the unit, continue holding the factory reset switch for 4 – 5 seconds, continue holding the reset switch and plug the power supply back into the unit. You should hear a beep if not that is alright.

Where is the reset button on Amcrest camera?

The has an external factory reset button lit by a LED located on the backside of the camera. Press and hold the factory reset button for approximately 20 seconds, or until the green light changes to red.

How do I reset my Amcrest camera?

Step 1: Raise the camera upward and locate the reset button. Step 2: Press and hold the factory reset button for 45 to 60 seconds allowing the camera to reset. While resetting, the device will rotate and the LED on the front of the camera will blink green indicating it is ready to be connected back to the app.

How do I reset my Amcrest camera DVR password?

In the Setting menu, tap on Password Security. Tap on Reset Password. The app will request permission to use the camera on your smartphone. Scan the QR code provided by your DVR.

How do I reset my Amcrest camera username and password?

Step 1: Navigate to amcrestcloud.com and log into your Amcrest Cloud account. Step 2: Click on the camera’s options menu for your camera and click on Edit. Step 3: In the Edit Camera menu, enter the new username and password for your camera. Step 4: Click Save.

How do I reset Amcrest DVR?

How do I reset my Amcrest admin password?

Step 1: Open the Amcrest Surveillance Pro software and click Forgotten Password. Step 2: Enter the security question answers that were set when initially setting up the software. Click Next to continue. Step 3: Enter a new admin password for the software and confirm the password in the next field.