Should I wax my fjallraven trousers?
Table of Contents
Most of our G-1000 garments come pre-waxed; but after a few washes and with regular use the wax will need a top up. And if you know you’re going somewhere that’s likely to be wet and windy, then you can plan ahead and add an extra layer of Greenland Wax.
Can Greenland Wax be use on other clothes?
Although designed for the Fjällräven G-1000 clothes, I have no reason to suspect it won’t work on other clothes. I found applying it extremely simple, easy, and not messy at all. First of all, you simply rub the wax block onto your clothes. Then you melt it.
How long does Greenland Wax last?
However, because the Greenland Wax washes out after two or three cycles, we suggest only washing your garment when it really needs it. If the item is made from a combination of fabrics, you should pay close attention to the washing care label inside the garment – especially those with down or synthetic padding.
How do you make Greenland Wax?
Both parafin and beeswax are usually sold in 0,5 – 1 kg pieces. From 1 kg you can make 20 pieces of Greenland wax, which is enough for all your friends as well. The process is very simple: melt parafin (about 90%) and beeswax (about 10%) in a container which is placed in a hot water bath.
How good is Greenland Wax?
Fjallraven Greenland Wax is an environmentally friendly water-proofing agent made specifically for use with G-1000 clothing. When applied to your clothing, this simple blend of paraffin and beeswax provides improved wind- and water-resistance, as well as overall durability, leading to a longer-lasting garment.
Can you melt Greenland Wax?
Step 2: HEAT Don’t forget to wipe the iron clean before using it on another garment. A hairdryer or the flame from a camping stove (see below) can also be used for melting the wax. Greenland Wax melts at approximately 55°C to 60°C, that’s 131°F to 140°F.
Does G-1000 shrink?
I own several garments made of the G1000, and have noticed no shrinking from machine wash and dry. I have found Fjallraven to be well thought out in fitting, so as long as you don’t have an unusually long inseam there shouldn’t be a problem.
What is fjallraven Greenland wax made of?
Made from high-quality paraffin and beeswax, which makes Greenland wax more gentle towards both people and the environment than chemical-based impregnation. A wax block of 100 grams will be enough to wax about ten garments.
How can I waterproof my fabric naturally?
In general, use a ratio of 2:1 wax to drying oil. Once the mixture begins to harden, use a spatula or popsicle stick to spread the mixture on the fabric you want to waterproof. Use a fabric made of natural fibers; natural fibers such as cotton are hollow, which allows them to absorb the waterproofing mixture.
How does Greenland wax work?
The Fjällräven Greenland Wax improves water and wind resistance while still offering the breathability of the fabric. Once applied, it also increases the garment’s durability and lengthens its lifespan. It is made from two natural ingredients, paraffin and beeswax and is environmentally friendly.
What is Greenland Wax?
Rubbed on and melted in for a water resistant and durable surface. Made from high-quality paraffin and beeswax, which makes Greenland wax more gentle towards both people and the environment than chemical-based impregnation. A wax block of 100 grams will be enough to wax about ten garments.
How to wax G-1000 garments?
How to Wax Your G-1000 Garments 1 Step 1: APPLY#N#Hold the block of Greenland Wax in your hand, apply a thin even layer by rubbing in long strokes against… 2 Step 2: HEAT#N#Using an iron on low to medium heat and without steam, slowly melt the wax into the fabric. Don’t forget to… 3 Step 3: REPEAT More
Why choose Fjällräven?
The high-quality beeswax used is completely natural, sourced from bee farms, it’s a by-product of honey production. Following a Swedish expedition to Greenland in 1966, Fjällräven founder Åke Nordin noticed the availability of outdoor clothing was far too limited.
How do I Wax my Keb trousers?
Garments made using a combination of materials, such as our Keb Trousers (G-1000 and stretch), apply wax only to the parts made of G-1000. Then follow the same steps of melting the wax into the fabric, and repeat if necessary. Please note, stretch or MT fabric should not be waxed, as ironing may compromise its original composition.