What is special about a lighting contactor?

Table of Contents

Lighting contactors are relay switches that control the flow of electricity through a circuit powering the lighting in a given area. They exist remotely and control circuits with higher voltages which can be dangerous to the operator, if controlled directly.

Can you use a definite purpose contactor for lighting?

Definite purpose contactors for lighting systems can be controlled either manually or automatically, and are typically used in lower demand, low-cost applications. Both single pole and multi-pole contactors for lighting systems are available.

How long can a contactor be energized?

For example, a properly applied contactor will have a life span of 10,000 to 100,000 operations when run under power; which is significantly less than the mechanical (non-powered) life of the same device which can be in excess of 20 million operations.

Can you use a 2 pole contactor in place of a single pole contactor?

Yes, a 1 pole can be replaced by a 2 pole, and the 2 pole provides additional switching capabilities.

Are definite purpose contactors normally open or closed?

All of the C25 definite purpose contactors have normally open power poles – they do not come in normally closed power poles.

Is A1 neutral on a contactor?

It goes into the A2 slot on most contactors. This slot will be opposite from the A1 slot. The neutral wire completes the circuit so electricity can flow safely back toward the power supply. Click to see full answer.

How do the Schneider Electric Lighting Control Relay switches work?

The Schneider Electric Lighting Control Relay Switches provide manual ON/OFF operation of lighting in zones. The switches are equipped with a switch based device using reversible polarity pulse technology. The switches are fully compatible with Lighting Control Relay Panels by Schneider Electric. Manual ON/OFF is the most common override operation.

How do I contact Schneider Electric Customer Service?

Why Schnieder electric lighting control?

Whether you’re creating a lighting control system for a single room or a whole facility, Schnieder Electric lighting control offers scalable systems to fit your exact needs. Our C-Bus solutions are designed around the size and requirements of your application. All this with a common platform and easy installation practices.

What is the UL code for Schneider light fixtures?

• Use with new or existing lighting fixtures. • Use with Schneider Electric occupancy sensors. • All models are constructed with UL 94 V-0 rated plastics. • UL/cUL listed. 29 &RXUWHV\\RI6WHYHQ(QJLQHHULQJ,QF\fDOHV#VWHYHQHQJRPZZWHYHQHQJLQHHULQJRP