How do I calculate gas fireplace?
The formula to calculate the cost to run a gas fireplace is: (Fireplace BTUs Output * Cost Per Therm)/100,000. Note that 1 Therm = 100,000 BTUs. You can use an energy compare website to get an example rate for your area per therm.
How do I know how much fire glass I need?
We recommend that you use 1–2 inches of fire glass to cover the burner, but be sure to not overfill your fireplace or fire pit. While fire glass is a great way to bring out the best in your fire feature, you can get even more ideas from our video on how to accessorize your gas fire pit.
How many BTUs do I need for an outdoor fireplace?
We find that around 1 BTU has the heat of a single candle, so an everyday 1500-watt floor heater provides around 5k BTUs of comfortable heat, a portable patio heater provides 40k BTUs, and a medium sized fire pit for residential or commercial use is around 90k BTUs on average.
What is the radius of a fire pit?
between 36 and 44 inches
The optimal size for a fire pit is between 36 and 44 inches inside diameter. That will create enough room for a healthy fire but still keep gatherers close enough to chat.
How many pounds of Fireglass do I need?
Example: If your fireplace had a front width (A) of 36″, a back width (B) of 24″, a depth (C) of 15″, and you wanted a 3″ height (D) of fire glass to cover the entire fireplace floor, then you would buy about 70 pounds of fire glass.
How do you calculate fire pit blocks?
Calculate how many stones or blocks you will need by multiplying the diameter of the circle by 3.14 (pi). For example, for a 4-foot diameter circle, multiply 48 inches by 3.14 for a total of 150.72 inches.
Is 50 000 Btu good for a fire pit?
While you need a fire pit with a heat output of 50000 – 60000 BTU to warm up a larger area. The pit with 70000 BTU (or above) is considered the most powerful that effectively work to heat up the area quickly, but they are a bit hard to use.
How are gas log sizes measured?
Determine The Size Of Your Gas Logs
- Measure the front width of you fireplace.
- Measure the width at the back of your fireplace.
- Measure the depth from the front to the back of your fireplace.
- Measure the height from the top to bottom of the front your fireplace.
How much does fireproof glass cost?
Fire-Rated Glass Cost In general, the minimum cost of ceramic fire-protective glass is around $100 per square foot, though prices vary based on customer specifications. The minimum cost for wired fire-rated glass is around $50 per square foot minimum, with varying prices due to customer specifications.
Should fire glass cover the burner?
Should I cover the burner with fire glass, or should I leave it exposed? Yes, you should cover the burner — but only with just enough fire glass so that it’s not visible. This is especially true if you’re using a propane fire feature, since propane is heavier than air and needs to be dispersed close to the flame.