How do I fix error 1485 on my Canon printer?

How do I fix error 1485 on my Canon printer?

Is there any way to fix the 1401, 1687 and 1485 support codes?

1. Ensure both a black and colour cartridge are installed.
2. Check the cartridges have the correct codes.
3. Make sure the contacts are clean.
4. Replace the defective ink cartridge.
5. Clean the contacts inside the printer.

How do you bypass the ink on a Canon printer?

It is a low ink warning for the printer series using the ink cartridge PG-240, PG-240XL, CL-241 and CL-241XL. You can just need to press and hold the STOP/RESET/RESUME button for 5 seconds to clean this message and continue to print.

How do you get rid of low ink error?

If your printer doesn’t allow you to print, usually a simple reset process will solve the problem.

1. Take out the cartridge.
2. Turn off the printer,
3. Unplug the power cord,
4. Wait for 5~15 seconds, then plug it back in,
5. Turn printer back on.
6. Reinstall the cartridges.

Why is my Canon printer saying error?

Why Is My Printer Showing Error? The most common cause when the printer shows printing error is because of the connection issue. Maybe your connection between the printer and the computer is lost. Check your USB cable and other wire, and if you are sure that all the wires are OK, then try to reconnect your printer.

What does 1401 mean on Canon printer?

The FINE cartridge is not installed
Support Code=1401 The FINE cartridge is not installed. Install the FINE cartridge. If the error is not resolved, the FINE cartridge may be damaged.

Why does my Canon printer say ink run out when printing?

This is because the Canon software/hardware has a tendency to overestimate how much ink has been used when printing or even cleaning using a cartridge. Thankfully it only takes a single button press to get past this message and you can continue with uninterrupted printing until the ink has physically run out.

How do I fix a printer error?

Press the printer’s OK button to continue printing. A printer error has occurred. Some errors occurred while copying and a certain time passed. Press the OK button to dismiss the error, and try to copy again. Check the device connected to the Direct Print Port.

How do I fix a printer that won’t send faxes?

If paper has jammed in the printer, clear the jam, reload the paper in the printer correctly and then press the OK button. A power failure has occurred or the power cord has been unplugged when the faxes are stored in the printer’s memory. If a power failure occurs or you unplug the power cord, all faxes stored in the printer’s memory are deleted.