How do I format a Synology NAS drive?
Locate the RESET button on your Synology NAS. Press and hold down the RESET button for about 4 seconds until you hear a beep. Release the button immediately. Within 10 seconds, press and hold down the RESET button again for 4 seconds until you hear 3 more beeps.
Does resetting Synology wipe data?
Resetting the Synology NAS does not impact its data. However, we strongly recommend launching Backup & Replication (available on DSM 5.2) or Hyper Backup (available from DSM 6.0) to back up data and system configurations before the reset. Refer to the Synology Assistant Help page for definitions of device status.
How do you wipe a NAS drive?
Do not disconnect any disks or power off the NAS while secure erase is running.
- Go to Main Menu > Storage & Snapshots > Storage > Disks/VJBOD.
- Select a free disk.
- Select Action > Secure Erase. The Secure Erase window opens.
- Optional: Select additional disks to erase.
- Click Next.
- Select an erase mode. Mode.
- Click Next.
How do I reinstall DSM without losing data?
The hard reset should be used only for reinstalling the DSM OS. It’ll completely clear the NAS aside from stored data. Press and hold down on the reset button for approximately four seconds until a beep sounds. Press and hold down on the reset button again for approximately four seconds until three beeps sound.
Can you format a NAS drive?
Yes. We have to format the HDD when it is installed in the NAS.
What is a Synology DiskStation ds1513+ NAS server?
The five-bay Synology DiskStation DS1513+ might seem like overkill, and it’s in fact a very advanced storage system, but the server turns out to be a system built for both general consumers and small and medium-size businesses. It’s the prime example of how a NAS server can be so much more than just storage attached to your network.
What is Synology DiskStation Manager?
Synology DiskStation Manager (DSM) is a browser-based operating system which provides tools to access and manage your Synology DiskStation. When installation is complete, you will be able to log into DSM and start enjoying all the features of your Synology DiskStation.
What is the difference between the DiskStation ds1513+ and the ds1511+?
The DiskStation DS1513+, the replacement for the DiskStation DS1511+ which has been discontinued, has the same front-facing drive-bay design as its predecessor and many of its peers. However, unlike the others, the DS1513+ offers a completely “tool-free” design.
What DSM version does central management system support for Synology NAS?
After the update, if your Synology NAS is a managed server in Central Management System, the CMS host must run DSM 6.2.4 or above and CMS 2.1.4 to be able to manage important DSM updates and package updates on your device. Central Management System no longer supports managing Synology NAS with DSM version earlier than DSM 6.2.