How high should my bass pickup be?
Table of Contents
Using a 6″ (150 mm) ruler, measure the distance from the bottom of the first and fourth strings to top of the pole piece. A good rule of thumb is that the distance should be greatest at the fourth-string neck pickup position and closest at the first-string bridge pickup position.
How far should Jazz bass pickups be from strings?
Fender recommends 2mm space between the underside of the string and the polepiece for the treble- and 2.8mm space for the bass side for J- and P-basses.
What does adjusting the height of pickups do?
Set to the correct height, your pickup’s magnets create a strong magnetic field that gives your guitar the tone that you love. Set too high, and your pickups can push and pull your strings out of tune. The Magnetic Field is not optimized when the pickup is set too low.
How does bass pickup height affect tone?
Guitar pickup height affects tone due to the distance between the pickups and the guitar strings. As the distance gets smaller, the string’s vibration pattern, pitch, and sustain are altered along with an increase in the pickup output. All of these factors ultimately affect the tone of the guitar.
How close to the strings should pickups be?
Start by setting all of your guitar pickups to 3/32” (0.093”, 2.38mm) on the bass side and 2/32” (1/16”, 0.0625”, 1.98mm) on the treble side. Remember, this is the space between the top of the pole piece and the bottom of the string, held down at the last fret.
How far should bass strings be from the fretboard?
Measuring at the 12th fret (as in the photo), the action height should be 2.6 mm for Steel String Acoustic guitar, 1.8 for electric, 2.0mm for bass and 3mm for a Classical.
How close should Pickups be to strings bass guitar?
As a starting point/rule-of-thumb sort of thing, though, I’d advise the following: Don’t set humbuckers closer than 4/64” (1.6mm) Don’t set Fender-type pickups closer than 6/64” (2.4mm) Don’t set P-Bass closer than 6/64”(2.4mm) and J-Bass closer than 5/64” (2mm)
How do you measure the height of a bass string?
Step One: Measuring the action If you don’t have one, don’t let that stop you. With your ruler, measure the distance from the top of the 12th fret to the bottom of your lowest string. We typically use small increments in order to be as accurate as possible.
How high should my pickups be?
Why can’t I adjust my pickup height to bass?
Your Bass strings have more mass and will disturb the magnetic field more than treble strings. Reversing your pickup height orientation will provide you with “warbling” bass strings and thin treble strings – not good.
How do you adjust the pickup on a guitar?
Second: With the string depressed, use a machinist’s rule and measure the distance from the bottom of the string to the top of the corresponding pickup pole piece. Third: Raise or lower the pickup until it is at the manufacturer’s factory spec. How to raise and lower your pickups depends on the design of the pickup.
What is the correct pickup height orientation?
The correct pickup height orientation is lower on the bass side and closer on the treble side. Your Bass strings have more mass and will disturb the magnetic field more than treble strings.
What is the correct pickup height for a guitar?
The reason why there is no “100% correct” height, is that every guitar, player, and playing style differs. One guitarist may play harder than another guitarist, and one guitar may have thicker and heavier gauge guitar strings than another! 1.) Setting Pickup Height Too High: