What does SD mean on Maytag Bravos?
Table of Contents
excessive detergent suds occurred
“Sud” or “Sd” in display of your Maytag Washer This error code indicates excessive detergent suds occurred during the cycle. This could be caused by using too much detergent or not using High Efficiency (HE) detergent. The washer will not be able to spin out water with the excess suds.
How do you clear the error code on a Maytag Bravos washer?
Write Down The Error Code! Then press PAUSE/CANCEL once to clear the error code and try to start a new cycle. If code appears again put it through an automatic diagnostic cycle while you enjoy a nice soothing cup of tea. (Watch The Bravos Diagnostics Video) This will reveal any stored error codes.
What do you do when your washing machine says Sud?
The washer has detected too many soap suds; it should pause automatically and wait for the suds to dissipate. Making sure you are using a high-efficiency detergent, not using too much detergent, removing detergent residue from the washer, and cleaning the drain pump filter should resolve the issue.
How do I reset my Maytag Bravos dryer?
Full Reset Disconnect the power to the Maytag dryer and wait 30 minutes. After 30 minutes, restore power and make a new selection. If the problem persists or the dryer will not operate, disconnect power once again and call Maytag for service.
How do I get the error code on my Maytag Bravos dryer?
Unplug the dryer for 5 minutes and the plug the dryer back in. If the code reappears, replace the main electronic control board. A stuck button on the user interface control board causes this code. If you can’t free the stuck key, replace the user interface control board.
Why does my washer say SD?
There are too many suds in the washing machine. The washer will not be able to spin out water with the excess suds. When “Sud” or “Sd” is displayed, the washer automatically extends the rinse time to remove the excess suds. During this time, the washer pauses the tumbling and adds water for additional rinsing.