What is NiCr NI thermocouple?
Thermocouple wires made of NiCr-Ni (Type K), are often used in industry for the manufacture of various thermocouples. They are mainly used for measuring at extremely high operating temperatures.
What is N type thermocouple?
Thermocouple Type N Technical Details Type N is a relativity new thermocouple type that was made to be an alternative to Type K. It has high stability over time but is more costly than type K at similar temperature ranges. Its sensitivity is about 39 µV/°C, slightly lower compared to type K.
What is USB TC?
The USB-TC is a USB 2.0 full-speed, thermocouple input module that is supported under popular Microsoft® Windows® operating systems. The USB-TC is fully compatible with both USB 1.1 and USB 2.0 ports.
What type of signal output is derived from a NICR NI thermocouple?
thermoelectric voltage
The output signal is the thermoelectric voltage of thermocouple type K, which depends on the measured temperature. The probes don´t require operation and maintenance. It is necessary to ensure in operation, plastic parts of probes (handles) not to be exposed to temperature higher than 80 °C (probe GT1150 up to 220 °C).
How do I connect a thermocouple to a DAQ device?
TC x (+/-): Most NI thermocouple hardware refers to TC+ and TC- terminals for each differential measurement channel. AI x (+/-): Some devices may refer to AIx+ and AIx- instead, where x refers to the channel number. The next step is to physically connect the thermocouple to your DAQ device. Click the Connection Diagram tab in MAX to continue.
What thermocouples are compatible with the NI-DAQmx device?
The device is compatible with J, K, R, S, T, N, E, and B thermocouples.The Temperature Input Device includes the NI-DAQmx driver and configuration utility that simplify configuration and measurements. NI-DAQmx supports NI programming environments as well as Python, ANSI C, C#.NET, and MathWorks MATLAB® software.
What does K-type thermocouple mean?
K-Type Thermocouple, 32°F to 900°F Temperature Sensor —The K-Type Thermocouple works with NI measurement devices and software to help you acquire temperature data within a measurement system. You can use LabVIEW or FlexLogger software and NI-DAQmx driver software to configure measurements and predefined…
Do I need a service agreement for a K-type thermocouple?
A valid service agreement may be required. Open a service request K-Type Thermocouple, 32°F to 900°F Temperature Sensor —The K-Type Thermocouple works with NI measurement devices and software to help you acquire temperature data within a measurement system.