## What is struck volume?

Table of Contents

The capacity of a mine car, tram, hoppit, or wagon to the flat surface at the edges; i.e., the volume of water it would hold if of watertight construction.

**What is the volume of an excavator bucket?**

Backhoe buckets : Description for excavators to 19 from 24 tons

Width | SAE Volume | Weight |
---|---|---|

400 mm | 240 liters | 465 kg |

450 mm | 285 liters | 495 kg |

600 mm | 420 liters | 555 kg |

800 mm | 605 liters | 645 kg |

### How many M3 are in a excavator bucket?

Heavy Duty Excavator Bucket (Rsbm30T) Capacity: 1.5 Cubic Meter (M3)

**What is a struck bucket?**

The amount of material that can be held in an excavator’s bucket which has been levelled off. It is equivalent to the volume of water a bucket would hold if it was watertight…. General Links for this Work. Preface. Acknowledgements.

## What is the bucket capacity of JCB?

Product Specification

Brand | JCB |
---|---|

Capacity | 3000 kg |

Backhoe Bucket Capacity | 0.6 cum |

Loader Bucket Capacity | 1.8 cum |

Maximum Operating Weight | 8000 Kg |

**How is JCB bucket calculated?**

Divide the per cycle payload (6.67 tons) by the material density (1.25 tons/cu. yd.) to determine the nominal bucket capacity: 6.67 / 1.25 = 5.28 cu yds.

### What is the struck capacity of a bucket?

Struck capacity is defined as: The volume capacity of the bucket after it has been struck at the strike plane. The strike plane passes through the top back edge of the bucket and the cutting edge as shown in Fig. 7.1 (a).

**How to measure the struck capacity of the backhoe bucket excavator?**

This struck capacity can directly be measured from the 3D model of the backhoe bucket excavator. On the other hand the calculation of the heaped capacity is done by following the standards.

## How to estimate bucket capacity volume?

How to Estimate Bucket Capacity Volume = Cross Sectional Area x Length We all know that the volume is calculated by multiplying Width x Height x Length or Area of the end x Length. But what if the area is not a simple geometric shape, or in the case of Heavy Equipment Buckets, how do you define the shape for the volume to be calculated?

**What is the total amount of material carried by a bucket?**

The total amount of material carried by a bucket is the amount inside the bucket plus the amount piled on top of it. This is called the Heaped or Rated Capacity.