Are SATA spray guns Good?
Table of Contents
SATA spray guns guarantee perfect finishes through their excellent precision and highest quality. Choose the most suitable technology according to your personal needs – our spray guns are available with RP as well as with HVLP technology.
Where are SATA spray guns made?
Germany
SATA is a leading spray gun manufacturer who’s spray guns are exclusively developed and manufactured in Germany. Strict quality controls monitor every single manufacturing process. The high precision components are assembled with ultimate care, while each nozzle set is manually fine-tuned.
What is a RP spray gun used for?
The SATA spray master RP combines trend-setting, mist reduced high pressure technology with the advantageous properties of a material pressure supported spray gun. With this unique combination, almost all paint systems of different viscosities up to thick-film glazes can be processed with excellent painting results.
What air pressure do you spray paint at?
When spraying base coat you want to spray at about 26-29 PSI. They way you read this is at your gun, trigger pulled air flowing through and your dial reading 26 psi. When spraying clear coat I like to up the pressure 2-3 psi for a little more atomization and better flow out.
Where is SATA manufactured?
SATA worldwide Because SATA spray guns, breathing protection systems, compressed air filters and a wide range of accessoires are exclusively developed and manufactured in Germany and enjoy an excellent reputation all over the world under the SATA brand.
Which is better HVLP or RP?
Summary. If only one (1) gun is used for both basecoats and clearcoats, then the ‘RP’ is the better choice. In general, RP is the better all around gun. Regarding paint savings: often it is said that RP guns are using more paint than HVLP.
What is the difference between SATA RP and HVLP?
HVLP stands for “High Volume Low Pressure” and denotes an internationally recognized application method. RP is a SATA acronym for “Reduced Pressure” which is optimized high-pressure spray guns that achieve a great finish and transfer efficiency of over 65%.
What is the difference between SATA HVLP and RP?
Sata 5000 HVLP paint gun. HVLP is a general industry terms and stands for ‘High Volume Low Pressure’ (at least 65% transfer efficiency). ‘RP’ is a SATA acronym for ‘Reduced Pressure’. Spray guns with ‘RP’ technology belong to the group of ‘compliant” guns.
What’s the difference between HVLP and RP spray guns?
Is SATA the best paint gun?
The SATA paint guns are famous worldwide as high quality and excellent for even film-build, high transfer efficiency, great metallic control, and durability. The newest topcoat model, the SATAjet X 5500, has taken all of that to an even higher level.
Are LVLP spray guns any good?
LVLP spray guns are better than HVLP spray guns because they produce few defects. This is because air bubbles can be produced in high volume which can cause a lot of defects. The LVLP uses low pressure and a thin nozzle which allows a low volume of paint to be pushed out of the gun.
How much inlet air pressure can RP spray gun use?
10 psi
The current regulations on spray guns is that they must not exceed 10 psi at the air cap, or if that air pressure is in excess of 10 psi, the transfer efficiency of the spray gun must meet or exceed 65 percent.
Is SATA better than DeVilbiss?
The Satas are chrome plated and come in weighing less than comparable guns. The machine finish on the parts is better than Devilbiss from my experience. A Sata 3000 RP goes for about $400.