Can you refinish a pine table?

Can you refinish a pine table?

Rather than throwing out old pine furniture that no longer matches your decor, you can refinish it. A softwood, pine takes stain well. The refinishing process requires special care especially when sanding, as any rough spots or marks left on the piece will show through on the new finish.

How do you Modernise a pine table?

How to upcycle your pine table:

1. For the legs, wipe over to remove any dirt and dust and apply two coats of primer.
2. Once the primer is dry, apply the chalk paint.
3. Now for the table top: sand the top and edges until you’ve removed any varnish and residue.
4. Finally, apply the wood varnish.

What do you put on a sanded pine table?

Hard wax Oils are quick and easy to apply, maintain and repair. Clear oils tend to draw out the natural coloration of the timber which with Pine, can be a can be a yellowy brown or orangey brown colour. To retain the ‘freshly sanded’ look, we recommend using Fiddes Hard Wax Oil Natural or Osmo Polyx Oil Raw (3044).

What stain is good for pine?

Best Stain for Pine Overall: GENERAL FINISHES New Pine Gel Stain. Pine can be slightly challenging when it comes to applying a wood stain. The General Finishes Stain is an original gel wood stain that is easy to apply. This is an oil-based wood stain that can easily be wiped on, and it is as simple as that.

How to stain a pine table top without splotches?

Pine is a soft wood and is really difficult to stain without getting a splotchy finish. One way to help this is to apply a Pre-Stain wood conditioner. The one I use is Minwax. The pre-stain is easily applied with a sponge brush. The can says to let it dry for 15 minutes and no longer than 2 hours prior to staining.

How do you finish a wood dining table?

If the table is badly worn, it may be necessary to sand down to the wood to remove spots of rot and water stains. For a smoother finish, sand the table with fine grit sandpaper between coats. Be sure to clean off dust with a tack cloth each time. Wear a dust mask when sanding. Make sure there’s plenty of ventilation when applying finish coats.

How do you clean a table top?

1 Clean the table with a good degreaser product. 2 Gently sand the surface with 150 to 220 grit sandpaper. 3 Wipe the surface down with a tack cloth. 4 Optionally, Apply a deglosser per the product label directions (this step is optional, I did not do it, but if your table top has had lots of use, this will

How do you remove varnish from a wood table top?

Sand off the old finish (varnish or paint). For worn finishes you’ll need a coarse grit sandpaper, meaning a lower grit number, such as 60, to get down to the bare wood. For a less-worn table, you can start with a finer sandpaper, such as 100 grit, and take off only the top few layers of finish.