How do I program my PC1616?

How do I program my PC1616?

Enter Programming *8-5555- Enter section 898….DSC Power Series PC1616, PC1832, PC1864 Quickstart

1. *8 5555 on the keypad.
2. You will then be asked for ‘Section’ .. Enter in 999.
3. You will then be asked to enter Installer code .. Enter 5555.
4. The keypad should beep and then ask you for ‘Section’ again .. Enter 999 again.

How do I bypass zone DSC PC1616?

How to Bypass a Zone on a DSC Power Series Security Alarm Panel

1. The System Must be disarmed prior to proceeding.
2. Press the * Key.
3. Press the 1 Key.
4. Use the > key to scroll to the zone you wish to bypass.
5. Press the * Key on the appropriate zone.
6. A “B” should appear next to the zone when the system is bypassed.

What is the default master code for DSC alarm?

1234
The default master code is 1234. The master code is automatically assigned to user number 40. The master code is the first user code that comes programmed on the panel and it cannot be deleted, but it can and should be changed. The master code allows you to do quite a few things on the alarm system.

What is DSC model?

The DSC model allows for the characterization of non-associative behavior through the use of disturbance, and it computes microcracking during deformation, which eventually leads to fracture and failure. In the DSC model, the critical disturbance, Dc, identifies fracture and failure.

How many zones does pc1616 have?

The Power 1616 has 6 hardwired zone terminals on the panel out of the box. It can expand up to 16 hardwired zones by adding one PC5108 zone expander and using keypad zones for zones 7 and 8. With a wireless receiver added to the security system, it can be expanded up to 32 zones total between hardwired and wireless.

Is there a user manual for the pc1616 pc1832/pc1864?

PC1616/PC1832/PC1864 User Manual WARNING: This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. The entire manual should be carefully read. PC1616/PC1832/PC1864 User Manual

What is a DSc security system?

Your security system is made up of a DSC control panel, one or more keypads and various sensors and detectors. The control panel will be mounted out of the way in a utility closet or in a basement.

How many 6-digit access codes are available for the pc1616?

When using 6-digit access codes, the minimum number of variations of access codes are 20833 for the PC1616, 13888 for the PC1832 and 10638 for the PC1864. Access Codes ][5][Master Code] (when disarmed) The [✱][5] User’s Programming command is used to program additional access codes. User Codes – User Codes 1-48 are available for the PC1616.

Where can the pc1616/1832/1864 alarm system be used?

WARNING: This equipment, PC1616/1832/1864 Alarm System shall be installed and used within an environment that provides the pollution degree max 2 and over-voltages category II non-hazardous locations, indoor only.