How do you change the battery on a sentry v260 safe?
available, you may use a key override to access this unit.
- Remove the battery cover, disconnect and remove the. battery holder.
- Insert the skeleton key (second set of keys provided) into the key hole inside the opening for the battery. (
- Turn the key to the right.
- Turn the four-bitted key to the right.
What kind of batteries does a Sentry safe take?
Sentry recommends using fresh alkaline batteries for safes. Most models use four AA batteries to power the electronic lock. Avoid rechargeable and lithium batteries, which don’t always work well in electronic safes. Don’t mix old and new batteries and use all of the same brand of batteries for best results.
What do you do when a Sentry Safe won’t open?
Turn your back to the safe, and kick the door, hard, a few times. Be sure that you do not kick the keypad or the handle. This will help loosen the bolt work. Next, pull the handle in the opposite direction than you normally do and enter the code.
Why isn’t my sentry safe opening?
Disconnected and/or Damaged Wiring Remove the keypad and inspect the wires to see if they have come loose, are kinked, or cut. If everything is intact, disconnect the wire from the keypad, and remove the batteries. Wait at least 20 seconds, then reinstall the batteries and reconnect the wiring.
Where is the reset button on a digital safe?
Press the reset button on the inner keypad of the safe. It should be a small, black button with the word “Reset” next to it. Push the button with the end of the hanger. You may hear a beeping sound or the control panel may light up when you press the reset button.
How do I change the battery in my SentrySafe?
For SentrySafe models that begin with SFW123T, U; SFW205T, U: 1 Remove battery compartment from inside door. 2 Insert 4-batteries as indicated (Do not use rechargeable, or Non-Alkaline. Do not mix old with new batteries or mix brands of batteries). 3 Replace battery compartment.
What kind of batteries do I need for my SentrySafe device?
For all SentrySafe models, we recommend the following: Refrain from using rechargeable or Non-Alkaline batteries. Use quality name brand batteries. All batteries have expiration dates on them. Ensure those dates are as close to 10 years out from current year as possible.
Why is my digital lock not working on my SentrySafe?
Most digital lock problems are related to low, dead or Non-Alkaline batteries. For all SentrySafe models, we recommend the following: Refrain from using rechargeable or Non-Alkaline batteries. Use quality name brand batteries.