Is an oscillating spindle sander worth it?
Table of Contents
An oscillating spindle sander solves the problem by moving the sanding drum up and down, exposing more of the surface of the drum to the workpiece. The result is a smoother edge on your workpiece, free of burn marks.
What can I use instead of a spindle sander?
If you’re without a dedicated spindle sander, a simple solution is to use either your drill press or router table to do the job. On a drill press, it’s possible to set the speeds much slower than on a variable speed router, but either will do the job.
What is the best way to sand spindles?
The proper way to sand spindles is with two grades of sandpaper — from heavy to light.
- Fold a sheet of 100-grit sandpaper three times.
- Revolve the spindle back and forth, twisting it while you encircle it with the sandpaper.
- Slide the cylinder of sandpaper down or up the spindle, overlapping the first area by 1 inch.
How do you make a spindle?
You can make a simple spindle using recycled compact disks, a grommet, a small eye hook, and a dowel. Sand the ends of the dowel so they are smooth and have no burrs. On one end of the dowel rod, find the center and mark it with a pencil.
Can I use my drill press as a spindle sander?
As a spindle sander, the drill press will also work. There are a lot of new accessories out there to mimic the action of a spindle sander on your drill press and they work fine.
How do I sand my stool legs?
It’s pretty straightforward to sand down legs. You’ll need some 80 grit sandpaper and 220 grit sandpaper, cut into small pieces, about 3″ x 4″. I like to fold the paper in half, and then wrap it around the leg and move it back and forth.
What is an oscillating spindle Sander?
Unlike the regular sanders, an oscillating spindle sander uses two different motions to create abrasions and smoothen the wooden edges. The spindle and the sanding sleeve rotate together in a circular motion and oscillate in a vertical plane.
How many oscillations does a benchtop Sander have?
Built to smooth edges cut with a scroll or bandsaw, the benchtop oscillating sander delivers even sanding at 58 oscillations in ever… . Constructed with both rotating and oscillating spindles, the sander works on arcs, contours, and curves, among other irregular shapes.
How to use a spindle Sander for scratches?
If you watch the movement of the spindle sander, you will find the sleeve rotating in a circular direction for creating abrasions. And simultaneously, it will also move vertically in an oscillating motion for removing the scratch marks.
What kind of shapes can a Sander work on?
Constructed with both rotating and oscillating spindles, the sander works on arcs, contours, and curves, among other irregular shapes. Constructed with both rotating and oscillating spindles, the sander works on arcs, contours, and curves, among other irregular sh… .