What is Ln key?

What is Ln key?

noun. an L-shaped tool consisting of a rod having a hexagonal cross section, used to turn a screw (Allen screw) with a hexagonal recess in the head. A different size of key is required for each size of screw. QUIZ YOURSELF ON HAS VS. HAVE!

How do you use an L tool?

Allen keys work like most other screwdrivers and wrenches but with a few nuances. You can use them by placing one of the ends inside a fastener with a hexagonal socket head and turning it. Turning the Allen key clockwise will tighten the fastener, whereas turning it counterclockwise will loosen or remove the fastener.

What is an Allen key used for?

A hex key, also known as an Allen key is a simple tool used to drive bolts and screws with hexagonal sockets in their heads.

Is an Allen wrench a hex key?

A hex key, also known as an Allen key or Allen wrench, is a small handheld tool that’s used for for driving bolts and screws with a hexagonal socket. They are available in many different sizes, though they all have the same hexagonal-shaped tip. To learn more about hex keys and the benefits they offer, keep reading.

Is hex same as Torx?

Hexagon keys are also known by several other names including hex key, hex wrench, Allen key, and Allen wrench. Torx is a brand name trademark for fastener heads and keys that have a six-point, star-like pattern.

What is an L wrench?

An Allen wrench is one of the simplest wrenches to use. The Allen wrench itself is a small L-shaped wrench with six sides. If you look at a cross-section of the Allen wrench, it looks like a hexagon. Since the Allen wrench has such a specific shape, it can only be used with items especially designed for it.

What is socket wrench set?

Modern socket wrenches are made in sets, consisting of a number of short sockets with a square hole in one… In hand tool: Screwdrivers and wrenches. Early box and socket wrenches fit only a particular nut or screw with flat surfaces on the head. The open-end wrench may have rectangular slots on one or both ends.

Is hex same as Allen?

How to choose the right Spanner?

Thus the selection of a spanner is made according to the distance between the opposite sides of the nut or bolt. 2. Double End Spanner In these types of spanners, open ends are made at both ends to hold nuts or bolts heads in them.

What is the function of a spanner?

Thus the pin of this spanner gets fixed in the hole and performs the function of revolving it for opening or tightening it. 8. Adjustable Spanner These are special types of spanners, It is also known as screw wrench.

What is a one end Spanner?

In these types of spanners, only one end is open, in which the nut or bolt head is gripped to loose or tight. It is also known as a single end spanner.

How is the size of a spanner determined?

Their size is taken from the distance between their jaws. Thus the selection of a spanner is made according to the distance between the opposite sides of the nut or bolt. 2. Double End Spanner