How do I get my Simon XT to stop beeping?

How do I get my Simon XT to stop beeping?

To stop the touch screen from beeping, go into the SETTINGS menu and turn the VOLUME all the way down. This should stop it from beeping and then call Technical Support during available hours for further assistance. I cannot arm my system. Press the STATUS button.

How do I reset my GE Simon XT alarm?

You can reset an Interlogix Simon XT to factory defaults by first powering down the panel completely. Then hold down the four top buttons on the panel while the system is being powered back on. If successful, the Simon XT will reboot with its factory default settings fully restored.

How do you reset the low battery on a Simon XT?

To clear system status, press the STATUS button, read and/or listen to the status messages, then press DISARM. If the trouble condition was a low system battery, perform a sensor test. The STATUS light should turn off if all trouble conditions have been corrected.

How do I reset my GE alarm without code?

How to reset a house alarm without a code or you’ve lost it?

1. Go to your alarm system’s main access panel.
2. Remove the power plug to the alarm console from the socket.
3. Unlock and open the main panel with the console access key, or a small tool, such as a screw.
4. Disconnect one of the wires from the system’s main battery.

How do I clear the Simon XT Low battery?

What is Simon XT security system?

User Manual Security system components The Simon XT uses wireless technology to warn your family about intrusion, carbon monoxide, and fire. It may also be used to control lights and appliances within your home.

What is GE Security license for Simon XT?

Simon XT User Manual… Page 2 GE Security hereby grants the purchaser of this product a limited, nonexclusive license to practice the methods patented in the identified patents solely with products manufactured, sold or licensed by GE Security.

How do I communicate with my Simon XT system?

Simon XT User Manual Communicating with your system Sending commands or instructing your security system is done through a series of key presses on the panel, touchpads, or a remote telephone. Table 2.

How do I disarm Simon XT system?

Simon XT system quick reference Control panel Remote touchpad Keyfob Telephone Level 0: Subdisarm Enter the master code while the the system system is disarmed. Level 1: Disarm DISARM, .