How do I reset my HP 9050?

Table of Contents

To Perform a Cold Reset via Control Panel:

Turn the printer off…
Turn the printer on.
When you see the memory count begin, Press and hold the 6 key.
When all three LED lights remain lit, release the 6 key.
Press the 9 key three times until COLD RESET is displayed in the control panel.

How do I reset my HP LaserJet 4350?

To perform a cold reset:

Turn the HP printer power off.
Power on the laser printer and watch for the memory count to begin.
Hold down the (Checkmark) button, when you see the memory count begin.
Continue holding down the (Checkmark) button until all three printer control-panel lights flash once and then remain on.

Why does my printer say Maintenance Kit Low?

If the display panel on your HP LaserJet reads “Perform Printer Maintenance”, “Perform User Maintenance”, “Maintenance Kit Low”, “Maintenance Kit Very Low”, or anything along those lines it means your printer needs a preventative maintenance kit, which includes a fuser and various rollers.

How do I reset my HP 4200 to factory settings?

HP LaserJet 9000 series HP LaserJet 4200, 4300 series Turn the printer power off. Hold down the SELECT (Checkmark) button, and then turn the printer power on. Continue holding down the SELECT (Checkmark) button until all three printer control-panel lights flash once and then remain on. This might take up to 10 seconds.

How do you reset maintenance kit?

To Reset or clear the maintenance kit count via Control Panel:

Turn the printer off…
Turn the printer on.
When you see the memory count begin, Press and hold OK button until all LED lights remain lit.
Release OK button.

Why should you reset the page counter After installing a laser printer maintenance kit?

Once you have installed the maintenance kit the message will only go away if you clear the maintenance count. For example the laserjet 4000 has a 200,000 page maintenance interval. Once you reach 200,000 pages the error message appears and you need to reset the maintenance count to zero to make the message go away.

How do I reset my HP maintenance kit?

HP 9000 Printers:

Turn the printer off.
Press and hold the CHECK key.
Power on the printer.
Release the CHECK key after all three lights come on The display should read SELECT LANGUAGE.
Press the up arrow until MAINTENANCE KIT is displayed, then press the CHECK key again and the maintenance kit count has been reset.

How do you reset the maintenance kit on a printer?

Turn the printer off.
Hold down the Item key (minus side of the button) and Value key (minus side).
Turn the printer on.
Wait for RESET MAINTENANCE COUNT to be displayed and then release both keys.

How do you reset the maintenance light on a HP LaserJet P4015?

Method 1

Turn the printer to the “off” position.
Power on the printer.
Press and hold down the “OK” button while the memory is counting.
Continue to hold down the “OK” button until all three LEDs are illuminated.
Release the OK button.

How do I clear the fuser error on my HP printer?

Solution one: Reset the printer

Press the Power button to turn off the printer.
Disconnect the power cord from the rear of the printer.
Wait 30 seconds, and then reconnect the power cord.
Press the Power button to turn on the printer. Wait for the product to start.
Try printing again.

How do I make a new maintenance kit for my printer?

Hold down the CHECK button while powering on the printer 2. Keep button depressed until all 3 lights are on 3. Use UP arrow or Down arrow key to scroll to “NEW MAINTENANCE KIT” 4. Press the CHECK button to select 5.

How do I reset the maintenance count on my HP printer?

Resetting Maintenance Count 1. Hold down the CHECK button while powering on the printer 2. Keep button depressed until all 3 lights are on 3. Use UP arrow or Down arrow key to scroll to “NEW MAINTENANCE KIT” 4. Press the CHECK button to select 5.

How long should I let the printer sit before performing any maintenance?

Allow the printer to sit for 20 to 30 minutes before performing these maintenance procedures. Transfer Roller Removal and Replacement: 1. Open the front door of the printer and rotate large green lever downward 2.

What is the part number for the 110V printer maintenance kit?

When the Replace maintenance kit message appears on the control panel, you need to purchase a printer maintenance kit and install the new parts. The part number for the 110V kit is C9152A.