What is split face?
Table of Contents
Split face is a broad term used in the building materials industry for any material that has been broken or split to expose a rougher surface. In the case of stone, the split face is desirable as it provides natural texture and stratification that is hard to duplicate outside of nature.
What does split face block mean?
Split-Face Block, Split-Faced Block & Rock-Faced Block all mean the same thing: A concrete building unit which appears to have been hand-chiseled (or “split”) to give it a very textured look. In reality, the concrete slurry is poured into a form with the texture already built into it.
What is split face concrete?
Splitface Concrete Blocks have a deep textured relief which gives depth to the unit while also exposing the inner aggregates. This lends itself to customization through the use of different colored aggregates. Both structural an non-structural Splitface concrete blocks are available.
What is ashlar in masonry?
Definition of ashlar masonry : masonry made of sawed, dressed, tooled, or quarry-faced stone with proper bond.
How is split face stone made?
Split Face generally refers to products that have either been quarried or mechanically split using machines to create a rough hewn surface that shows off the natural cleft of the stone.
What is a split stone?
Definition of splitstone : made of stones split along the bedding planes into units from one to six feet long and about four inches thick and having a height of one, two or three courses of brick splitstone hearth splitstone finish.
What does a split face block look like?
The symptoms include water stains and bubbling paint on ceilings and walls, warping and buckling hardwood floors, water dripping from exterior wall outlets and light switch boxes, musty smells and mold formation. In extreme cases of long term water intrusion, the roof and floor joist ends get wet and rot.
What stone is ashlar?
Ashlar is a type of masonry which is finely cut and/or worked, and is characterised by its smooth, even faces and square edges. It can also be used to refer to an individual stone that has been finely cut and worked until squared.
Where is ashlar used?
Use. Ashlar blocks have been used in the construction of many buildings as an alternative to brick or other materials. In classical architecture, ashlar wall surfaces were often contrasted with rustication.