What does a PhosBan reactor 150 do?

Table of Contents

The PhosBan Reactor 150 is designed to push water upwards from the bottom and through the media. This forces an even distribution of water throughout the media and prevents channeling from occurring. This is also great for fluidizing media such as GFO where the filter media needs to tumble gently and evenly.

What is a Gfo reactor?

However, for those of you that are considering starting a reef aquarium or wish to increase your knowledge in this activity – what is GFO, granular ferric oxide is a chemical filter media that is used with a reactor that hinders algae growth in reef tanks by removing phosphates from the water column.

What is a media reactor?

A media reactor is an aquarium filtration device that contains filter media. It helps to increase the effectiveness of the filter media inside by forcing all water that enters the reactor to come in contact with the media.

Do media reactors work?

Not Really! Aquarium media reactors greatly improve the efficiency of filter media inside it by increasing the surface area and contact time between the media & the aquarium water as it is pumped through it. These simple containers allow easy mounting, cleaning and can be used singularly or mulitple together.

How long does ROWAphos last in a reactor?

The reality for someone blindly using RowaPhos is that they start off at 5 ppm and reduce it to 4 ppm by using the wrong sized pack, which they replace after 2 – 3 months by which time the concentration has returned to or exceeded its original level.

What is the capacity of the 150 reactor?

The 150 reactor can hold up to a maximum 200 grams of PhosBan media (5 inches or 12.7cm height within the column, with a recommended minimum of 2 inches or 5cm). The column can be filled to capacity when using granular activated carbon.

What is the phosban 150 media reactor?

The PhosBan 150 media reactor has a low profile and built-in hanging bracket making it ideal for “hang on the back” applications. The Phosban reactor works with a variety of filter medias such as activated carbon, GFO, and biopellets.

What size reactor do I need for my Aquarium?

Aquarium size: One reactor for up to 150 gallons (568 Liters). Multiple reactors may be used for larger aquariums. Recommended flow rate: ca. 20 – 30 gal/hr (75 – 115 l/hr) . Too much flow can grind PhosBan Connection for hoses 1/2 inch (12.7 mm) i.d. The inlet and outlet flexible 90° fittings rotate to suit your installation

What does Two Little Fishies do?

Two Little Fishies, Inc. (or TLF, Miami Gardens, Florida USA) has been providing products to the pet industry since 1991. They offer a variety of products ranging from fish and invertebrate foods to aquarium supplements.

What does a PhosBan reactor 150 do?

Table of Contents

What is a Gfo reactor?

What media do phosphate reactors use?

The reactor is filled with what is called granular ferric oxide (GFO) media.

What is a reactor for aquarium?

How do you use Kent phosphate sponge?

Use rubber gloves and place in a plastic container while rinsing! Then place in a large mesh bag (800 micron) or a canister filter, directly in the water flow. Make sure water flows through the material and not just around it. Leave in water flow for 8 hours to 2 days and remove.

What does a Biopellet reactor do?

The pellets are made of a biodegradable polymer. As the polymer breaks down, carbon is slowly released for the bacteria. This stimulates the nitrate-removing bacteria to do their job. The reactor allows you to control the water flow through the biopellets, safely maximizing the nitrate removal in your aquarium.

How do I get rid of phosphates in my reef tank?

There are four main ways to help lower the Phosphate level in your aquarium:

Water Changes & Vacuuming of Sand Bed (Detritus Removal)
A Good Protein Skimmer.
Macro-Algae in a Refugium or Turf Algae Scrubber.
Chemical Absorption Products.

Does skimmer remove phosphates?

Using a good protein skimmer will strip out organics, before they can release phosphate into the water. An efficient skimmer will remove dissolved and particulate organic matter, improving water quality and limiting phosphates and nitrates.

What do phosphate reactors do?

remove nitrates and phosphates from reef aquarium systems. Adding a biopellet reactor to your reef aquarium filtration system will improve the water quality for fish and other marine life. Biopellets initiate a more efficient denitrification process that removes nitrate and phosphate from aquarium…

What is the best media for reactors?

Activated Carbon or Granular Ferric Oxide are the two most common media ran in a reactor for a beginner aquarist.

There are two main types of reactor.
Granular Ferric Oxide or GFO as its more commonly known is a great product for helping to reduce Phosphates.

Can you use a media reactor for freshwater aquarium?

A media reactor (also called a phosphate reactor) is an advanced type of chemical filtration method, which you can use for both freshwater and saltwater tanks.

What is the capacity of a phosban 150 reactor?

Operating Instructions for the PhosBan Reactor 150 ™ Technical Data Capacity Use with up to a maximum of 200 grams (385 ml) of PhosBan, or a media height of 5 inches (13 cm). Aquarium size One reactor for up to 150 gallons (568 Liters). Multiple reactors may be used for larger aquariums.

What is the capacity of the 150 reactor?

How much phosphorus (po4-3) should be in a reef aquarium?

Often reported as PO 4-3, the recommended amount in a successful reef aquarium’s water should be low (less than 0.05 ppm, or mg/l, if you prefer). When we consider that the phosphorus (P) portion of phosphate (PO 4-3) is only about 1/3 of its weight, we can easily see that the ‘reactive’ part is only about 0.017 ppm.

What size reactor do I need for my Aquarium?