What is the cutting speed for 6061 aluminum?

What is the cutting speed for 6061 aluminum?

79.40-661.54 m/min.
Cutting speed: 79.40-661.54 m/min. Feed rate: 0.0508-0.2845 mm/rev. Cutting depth: 1 mm.

What is the feed rate for aluminum?

0.004 to 0.012

Material	Recommended Feed per Tooth, ft [in/tooth]
Aluminum and its alloys	0.004 to 0.012
Brass (360 high machining)	0.004 to 0.012
Bronze (high tensile)	0.002 to 0.006
Cast Iron (soft)	0.002 to 0.006

Can you machine 6061 aluminum?

Aluminum 6061 has a machining cost factor of 0.8 when compared to steel 12L14. It can be forged, hot worked, and readily welded, as well as heat treated, annealed, and aged. It anodizes well and provides a bright, colorful finish.

What is SFM for aluminum?

For cast aluminum alloys (i.e. 308, 356, 380), a surface footage of 500-1000 SFM is recommended, with RPMs varying based on cutter diameter. The basic calculation to find a starting point for RPMs would be (3.82 x SFM) / Diameter.

What is the SFM for aluminum?

500-1000 SFM
For cast aluminum alloys (i.e. 308, 356, 380), a surface footage of 500-1000 SFM is recommended, with RPMs varying based on cutter diameter.

Which aluminum is best for machining?

6061-T6
6061-T6 is one of the most popular aluminum alloys on the market and most manufacturing companies offer it as the standard grade for CNC machining. It’s versatile, easy to machine, and 6061 can even have different heat treatments. 6061-T6 is an excellent all-purpose material applicable to a wide variety of use-cases.

What is CNC aluminum?

Aluminum 5083 (CNC) is a strain hardening aluminum alloy with excellent corrosion resistance. Suitable for marine applications.

How do you calculate SFM?

1. Surface Feet Per Minute. SFM = .262 x D x RPM.
2. Inches Per Minute. CPT x Z x RPM = IPM.
3. Revolutions Per Minute. 3.82 x SFM / D = RPM.
4. Chipload Per Tooth. IPM / (Z x RPM) = CPT.
5. Feed Per Revolution. IPM / RPM = FPR.
6. Metal Removal Rate. WOC * DOC * IPM = MRR.
7. Radial Chip Thinning.

Can I use a 4 flute end mill on aluminum?

Material Considerations Traditionally, end mills came in either a 2 flute or 4 flute option. The widely accepted rule of thumb was to use 2 flutes for machining aluminum and non-ferrous materials, and 4 flutes for machining steel and harder alloys.

When and why to use aluminum 6061?

Type 6061 aluminum is one of the most widely used aluminum alloys. Its weld-ability and formability make it suitable for many general-purpose applications. Its high strength and corrosion resistance lend type 6061 alloy particularly useful in architectural, structural, and motor vehicle applications.

What are the differences between 6061 and 7075 aluminum?

Strength is the primary difference between 6061 and 7075 aluminum. 6061 aluminum is highly resistant to corrosion, whereas 7075 aluminum is a bit more susceptible to corrosion due in part to its copper elements. Can aluminum 7075 be cast? In some cases, as-cast 7075 aluminum alloy is directly used as billet in hot-working methods like extrusion.

What does the 6061 stand for in 6061 aluminum?

replying to pogo, Steven wrote: The first digit is the alloy type second digit is the modification of the. alloy and the last two digits are the purity of the aluminum so 6061 means. that in this case magnesium and silicon were added to the aluminum and that it. was not modified and it is 61 percent pure aluminum. –.

What is the current price of 6061 T6 aluminum?

Aluminum Prices? What are you paying per lb.? The best price I’ve seen for 6061-T6 was quoted a year ago, For 6061-T6511, I’m paying $2.00-$2.35 a pound, Chat Now Send Inquiry; 6061 Aluminum Cost Per Pound, 6061 Aluminum Cost