Are ball joints easy to replace?

Are ball joints easy to replace?

Ball joint replacement is not straightforward, as they can be very tricky to access and install – especially with age and rust. On some cars, the ball joint is integrated into the control arm. If you’re not familiar with the suspension and wheel assembly, it’s best to visit a garage for a professional check.

What else should I replace when replacing ball joints?

You just replace the lower joint, replacing the entire lower control arm would be a bear of a process and its not necessary in the least. The upper joint, however, is a different matter. With an OEM setup, you must replace the entire upper control arm, the joint itself is not replaceable.

How much does it cost to replace ball joints on a pickup truck?

In general, ball joints are inexpensive with a range between $20 to $80 each. Labor will vary greatly by model. Some vehicles cost as low as $60 to $80. Yet others, especially four-wheel drive trucks, can range from $160 to $200 per ball joint.

How much does it cost to replace both ball joints?

You might be surprised to learn that replacing a ball joint is not overly expensive. You can expect to pay around $300 in most cases, including both parts and labor. Most ball joints cost about $100 to $150, while the labor costs will run you $150 to $200.

How do I know if my ball joints are worn out?

Feeling a vibration in the steering wheel while driving down a level, straight road, or your vehicle drifting to the right or left when going over bumps may also be signs of ball joint wear. Tires — Uneven tire wear may be a sign that your ball joints are wearing out.

Can you replace the ball joint only?

Some ball joints can be replaced independently of the control arm, but not an easy DIY (need a press to get the ball joint out)! If this is going to be a DIY, change the entire control arm. Some ball joints can be replaced independently of the control arm, but not an easy DIY (need a press to get the ball joint out)!