Is the Schluter shower System worth it?
5.0 out of 5 stars Great product. Just take your time and follow the directions. Great product. It takes a little longer than the traditional mud shower bed and water-proofing methods, but it is worth it.
What is Troba level?
Schlüter®-TROBA-LEVEL is a combinable tile and paver support system that enables individual assembly heights from 3 mm to over 1 m. It is suitable for levelling any sloped assembly of up to 10%. Unbonded (or loose lay) installation is suitable for balconies, terraces, roof terraces and other accessible spaces.
Can I use Redgard on Schluter Kerdi?
Can you Redgard over Kerdi? No, it won’t interfere with the performance or adversely effect it. RedGuard is not harder to adhere to. There is no reason to use both products although it can be easier to use the RedGuard in corners and niches without the build up you can get with kerdi.
Can Schluter be used in a shower?
Schluter®-KERDI is a pliable sheet-applied waterproofing membrane and vapor-retarder designed for the direct application of tile. KERDI is ideal for use in tiled showers, bathtub surrounds, residential steam showers, and other tile applications in wet areas.
What is the difference between Schluter Ditra and Kerdi?
In this application, the Kerdi membrane is lightweight so a small notch trowel is essential. The Ditra and Ditra XL are a larger (heavier) material which requires more mortar for installation. This is why the larger notch trowel is recommended.
Is wedi cheaper than Schluter?
Schluter is half the price of Wedi in our area. If you break down the pieces of the system, the main cost difference is the shower base. Wedi’s shower base is much more expensive than Schluter’s shower base. The wall panels are about the same price.
How much does it cost to install Schluter?
Uncoupling membrane Schluter-DITRA has the advantage of being waterproof. It is also the thinnest, ideal for use where you don’t want height buildup. DITRA (1/8”) and DITRA XL (5/16”) cost $1.35 to $2.15 per square foot for the material. Installed cost is $3.00 to $4.00.
Is Schluter Kerdi paintable?
The product is elastomeric, free of solvents, and provides a strong bond to most materials, including wood, stone, concrete, metal, glass, and many synthetic materials. KERDI-FIX can be painted over with most alkyd resins or dispersion paint types.
Does Thinset stick to Kerdi fix?
Kerdi fix does not stick to thin-set FYI. So if you pre-treated the backs you just ruined the corner.
Can Kerdi-board be installed over plywood?
Since thin-set mortar works over almost any substrate, the Kerdi system can be used over drywall, plywood, or the various cement boards mentioned above.
What is a Schluter shower system?
The Schluter®-Shower System is an integrated family of products that together form a fully bonded, watertight assembly for tiled showers. The Schluter®-Shower System eliminates the risk of failures due to water and vapor penetration and dramatically reduces total installation time.
How do you waterproof a Schluter shower?
DESIGN AND INSTALLATION CONSIDERATIONS The Schluter®-Shower System provides a simple and effective means of waterproofing curbless installations. The key to this is that the KERDI waterproofing membrane is topically applied. Once the slope to the drain is established, KERDI and tile are installed, thus minimizing the thickness of the assembly.
How do you install Schluter shower trays?
Apply Schluter SET®, ALL-SET, FAST-SET®, or unmodified thin-set mortar to the substrate using a 1/4″ x 3/8″ (6 mm x 10 mm) square- or U-notched trowel. Note: The thin-set mortar used in this step is to bed and support the tray only. 1Place the KERDI-SHOWER-T/-TS/-TT tray and solidly embed in the mortar. 2 Begin by dry-fitting the components.
What size tile can I use with Schluter Schluter®-showerprofile-WSK shower profile?
KERDI-LINE-FC may be used with tiles that are 1/4″ (6 mm) thick or greater, to connect adjacent KERDI-LINE grates A and B. 34 INSTALLATION — Shower profiles Schluter®-SHOWERPROFILE-WS Schluter®-SHOWERPROFILE-WSK SHOWERPROFILE-WS can be used in conjunction with tiles that are 5/16″ (8 mm) thick or greater.