Can you add remote control to gas logs?
Table of Contents
Yes, you can add a remote to your gas log set after it’s been installed and the log set is already equipped with a millivolt valve. You may even be able to completely convert your gas log set to a remote control system with variable flame and thermostatic controls.
Do gas fireplaces have a remote control?
Gas Fireplaces Are Compatible with Specific Remote Controls With all of the options available today, it can be confusing as to what type may be best for your needs. That’s why we’ve put together this guide to the different types of remote controls that are designed for standard millivolt valves.
How much does a remote gas fireplace cost?
$475 – $1,500 – Feature-rich set of vent-free gas logs with remote control, hand-painted realistic logs and flame burners, heat output of 20,000 – 40,000 btu. While this won’t replace a gas furnace for heating your home, it does work well in emergency situations when heat is needed.
Do you need a fireplace screen for gas logs?
Jim says the answer is YES. While they are not necessary to prevent sparks and burning logs from escaping OUT into your room, some gas log manufacturers do require the use of a screen with their product. This is largely to prevent any flammable object from going INTO your fireplace.
What is the difference between vented and ventless gas logs?
Vented gas logs burn like a real wood fire with a yellow flame that produces smoke. They must be burned in a wood burning fireplace with the damper open, so smoke goes up the flue along with most of the heat. Ventless (vent-free) gas logs burn cleanly with a lower flame that does not smoke.
Do you need a special switch for a gas fireplace?
Does a gas fireplace switch work without electricity? Yes, gas fireplace wall switches don’t need any electricity to run. It runs in a millivolt circuit where the electricity is provided by the thermocouple of thermopile on the gas valve.
Can I install gas logs in any fireplace?
Vented gas logs can also be installed in outdoor fireplaces and fire pits that meet local building codes. You CANNOT install vented gas logs in any gas fireplace or gas stove including b-vent (natural vent), direct vent or ventless gas fireplaces. They MUST only be installed in an aproved fireplace that is fully capable of burning wood.
How do we install gas fireplace logs?
– Applying pipe thread sealant around the gas line connection on the burner. – Attach the gas supply line to the burner. – Fasten the connection tightly using a wrench.
How to install gas logs in a fireplace?
Install the gas logs. Installation of the gas logs will vary by brand and model, so be sure to reference your installation manual for specific directions. In general, the logs will only fit in the correct configuration. Place each log over the intended pin until all logs are in place.
Are ventless gas logs safe?
Ventless gas fireplaces work by using a small, wall-mounted furnace to heat air and expel it through an opening or series of openings in the fireplace. The heated air is then mixed with cold outdoor. Ventless gas fireplaces are safe to use as long as some safety precautions are taken.