Can Behr Deckover be used on concrete?
Table of Contents
Rather than leave the raw, clean concrete, I decided to try the BEHR PREMIUM DeckOver® product. This product is really unique, in that it brings new life to old wood and concrete surfaces. It also dries four times thicker than traditional solid color stains.
Can you use deck over paint on concrete?
Feel free to also submit a Star Rating on the Behr Deckover coating. Bring new life to old wood and concrete surfaces with BEHR PREMIUM DECKOVER. This 100% acrylic formula conceals cracks and splinters up to 1/4″, and creates a smooth, slip-resistant finish that also resists cracking and peeling.
How many coats should Behr deck over?
2 Coats
One gallon of ADVANCED DECKOVER Coating can cover up to 75 Sq. Ft. with 2 Coats. It is strongly recommended to fill cracks, nail holes and accessible board ends prior to applying the first coat.
How do I get rid of Behr Deckover?
The only good part about the peeling DeckOver was, it ended up being relatively easy to remove. Much of it came up just with our fingers- we could literally just pick it up and peel it off. What we couldn’t peel off with our hands, we used a scraping tool and would pry an edge off, then peel it off.
Can you paint over painted foundation?
Yes, you should paint your foundation walls. The primary benefit of the paint will be to provide aesthetic value for your home. Exterior masonry paint also provides a measure of protection against moisture and UV damage.
How long before you can walk on Behr Deckover?
Wait 24-48 hours before light foot traffic. 72 hours to full cure. Additional dry time may be needed in cooler temperatures and higher humidity.
What is Behr advanced deckover?
Important Note: Behr Deckover is now called Behr Advanced DeckOver. It comes in a smooth or textured finish. Bring new life to old wood and concrete surfaces with BEHR ADVANCED DECKOVER. This 100% acrylic formula conceals cracks and splinters up to 1/4″, and creates a smooth, slip-resistant finish that also resists cracking and peeling.
How do you apply Behr deck over textured coating?
TIP: For a more textured look use a Behr Premium Extra Textured Roller Cover with Advanced DeckOver Textured Coating. Apply a generous, even coat in the same section as the cut in and roll the coating approximately 4’ down the boards.
How should I prepare my deck before applying advanced deckover coating?
Properly prepare your deck before application. Your Surface Must be Completely Dry. Apply ADVANCED DECKOVER Coating only on a completely dry surface. After cleaning with water and appropriate cleaning products, allow a minimum of 24 hours of dry time. Do not apply in direct sunlight.
Does the Behr deckover cause peeling and failure?
Since the article was first originally published, we have had many comments from consumers who have used the Deckover and have had a terrible experience with peeling and failure. If you have used the Behr Deckover, please upload and post pictures of your exterior wood or deck with the Deckover on it.