How do you use 3M 6300 mask?
Table of Contents
Place the respirator over your nose and mouth with bottom straps unfastened. Pull the top strap over your head, placing the head cradle on the crown of your head. Hook the bottom straps together behind your neck. Adjust strap tension to achieve a secure fit.
How do you validate a 3M mask?
Follow the 3M Safe Guard™ process.
- Find the codes. On the bottom of the product box, just under the bar code or on the roll, you’ll see a 10-digit secure code and a 6-digit lot code.
- Enter the codes. Enter your codes here.
- Mark the product as validated.
What is 3m 6300 half facepiece reusable respirator?
3M™ 6300 half facepiece reusable respirator, can be disassembled, cleaned and reused. Featuring easy to adjust head straps, to fit all end users.
What is a 3m half mask respirator?
These half-mask respirators are made by 3M. Half-mask respirators are NIOSH-rated to provide respiratory protection from exposure to vapors, gases, and particulates, including those produced during spray painting, cleaning, and chemical processing.
How do I maintain the 3M™ facepiece 6000 series?
The 3M™ Facepiece 6000 Series must be inspected before each use to ensure that it is in good operating condition. Any damaged or defective parts must be replaced before use. The following inspection procedure is recommended. 8 1. Check facepiece for cracks, tears and dirt. Be certain facepiece, especially faceseal area, is not distorted. 2.
Can I use the filter retainer 501 on the 3M™ Half facepiece 6000 series?
It can be used with the filter adaptor 603 and the filter retainer 501 on the 3M™ Half Facepiece 6000 Series. ASSEMBLY INSTRUCTIONS NOTE:Make certain 3M™ Inhalation Port Gaskets 6895 are in place on the facepiece bayonet connectors before installing filters, cartridges or breathing tubes.